![background image](http://html.mh-extra.com/html/paw/mb3-10/mb3-10_assembly-installation-and-operation-instructions_764056020.webp)
3 Mounting and installation [specialist]]
20
991339002-mub-ml - V01
2021/11
This device is not intended for:
•
Children
•
Persons with restricted physical, sensory or mental capacities
•
Persons without sufficient experience or knowledge
unless they are instructed in the use of the device, and initially supervised, by a person
responsible for their safety.
3
Mounting and installation [specialist]]
3.1
Overview of the MB3.10 Modbus-RTU module
NOTICE
The following section describes only the installation of the MB3.10.
Do not put the module into operation in case of any visible damage.
WARNING
Risk of death by electrocution!
Disconnect the MB3.10 module from the power supply before opening
the body.
Make sure that the power supply cannot be unintentionally switched on
when the body is open.
The mounting location / the mounting surface must be dry, clean and
easily accessible.
10.
3 LEDs at the display
11.
RS 485 interface (FC3.10)
12.
RS 485 interface (GLT/BMS)
13.
Position of the jumper
(termination cascade)
14.
Position of the jumper
(termination GLT/BMS)
15.
USB service interface
16.
Power supply
17.
Placeholder for jumper
18.
fuse