Page 15
Attaching a tray (sold separately)
36.
Lower the tray* onto the PAW frame. Line up all holes in the
tray with the holes in the PAW frame brackets.
37.
Install (QTY 2) M8 x 20mm carriage bolts (L
-
Top) into the
front/top two holes of the tray. These two bolts (L
-
Top) go
through the tray brace (B).
38.
Install (QTY 4) M8 x 20mm carriage bolts (L) into the bottom
four holes of the tray. These four bolts (L) go through the
frame brackets.
Frame
Frame Brackets
6 Cu. Ft. Tray
L
L
-
Top
N
38.
Install (QTY 2) M8 hex nuts (N) onto the front/top (QTY 2) M8
x 20mm carriage bolts (L
-
Top).
39.
Install (QTY 4) M8 hex nuts (N) onto the bottom four (QTY 4) M8 x 20mm carriage bolts (L).
40.
Tighten all (QTY 6) M8 hex nuts (N) using a wrench.
N
N
N
*Purchase a 6 Cu. Ft. tray, sold separately
Suggestion: It will be easier to insert all 6 mounting bolts if you
do not tighten them until they are all in place.
