Fotoelektrik Pauly – Light barriers
E_52692 Ref. 2019-29
8/24
Fotoelektrik Pauly GmbH, Wahrbrink 6, D-59368 Werne, T: +49 2389/402 27-70, F: +49 2389/402 27-77
http://www.fotoelektrik-pauly.de, eMail: [email protected]
CPV1038
CPV1038*01
Switching capacity
Min. switching current
10 mA @ > 5 V
Main contact (to switch off the
travel movement)
AC1: 5 A @ 230 VAC DC1: 6 A @ 24 VDC
AC15: 2 A @ 230 VAC DC13: 1 A @ 24 VDC
Status message
AC1: 5 A @ 230 VAC DC1: 6 A @ 24 VDC
AC15: 1 A @ 230 VAC DC13: 1 A @ 24 VDC
Pollution warning
AC1: 6 A @ 250 VAC DC1: 6 A @ 24 VDC
AC15: 2 A @ 250 VAC DC13
1
: 1 A @ 24 VDC
Electrcal life
DC1: > 1 x 10
6
@ max. switching capacity
AC1, AC15, DC13:> 2 x 10
5
@ max. switching capacity
Switching rate
3 / s
Access time
≤ 80 ms
Switching displays
Switch indicator
for each optical system: 2 x LED green
Level indicator (for sighting
reflector)
for each optical system: 4 x LED red (DIANA)
Transmitted light
850 … 880 nm, invisible
Steady light resistance
> 80 k lux
Operating mode
Alternating light, dynamic, continually self-testing
Signal mode
Dark switching
Housing
Cast aluminum
Protection mode
IP65
– protection against dust and jets of water
Weight
~ 5000 g (without adjustment flange)
Operating temperature
-
25 °C … + 60 °C, non-condensing
Climatic conditions
in acc. with EN 60721-3-3:1995, table 1
max. relative humidity (d): 95%;
max. solar radiation (j): 700W/m²;
Condensation (m): none;
Wind-driven precipitation (n): none;
Formation of ice and frost (including freeze-thaw) (p): none
Special functions
Exterior test system
The safety-related switching outputs will be switched off and
the movement of the crane will be halted if there is
insufficient detection capacity
Sabotage protection
Covering of light barriers is detected and will lead to the
switching off of the safety-related switching outputs and the
crane movement will be halted
Pollution warning
The light signal level is evaluated continuously
Accessories
Reflectors
(intended use as per the clearance distance)
4R100BL
0.5 … 25 m
1 … 25 m
4R100BLAF
0.5 … 25 m
1 … 25 m
18R100BL
0.5 … 50 m
1 … 25 m
18R100BLAF
0.5 … 50 m
1 … 25 m
Adjustment flange
JF57S
Regarding CPV1038*01: Device without optical sensing behaviour in range 1 to 6 m.
1
With spark suppressor only, see Section
Fehler! Verweisquelle konnte nicht gefunden werden.
