• Never place or insert objects on the iron, due to the risk of
causing fire, accidents, or malfunction.
• Do not operate where oxygen is being administered, to
avoid the risk of fire.
• DO NOT USE WHEN CORD HAS BEEN DAMAGED OR IF
PLUG IS LOOSE.
• DO NOT REPAIR, TAMPER WITH, OR TRY TO
RECONSTRUCT the iron, otherwise electric shock,
malfunction, or accidents may result.
• When inserting or pulling out the plug, hold the plug firmly
to prevent the cord from peeling and to prevent accidents
or malfunction.
• Stop using immediately if you smell an offensive odor. If
ignored, it could cause a fire or other accidents.
• Do not keep the iron in a damp place, such as a bathroom,
or it may malfunction.
• Stop using the iron and remove from the power source
when there is an earthquake or thunder.
• Unplug the iron from the power source when cleaning or
wiping to prevent fire or electric shock.
• DO NOT use this tool on synthetic hair.
• NEVER clean this device with liquid cleaners, aerosol
cleaners, or cleaners containing detergents, abrasive or
corrosive materials.
• NEVER use this device for purposes other than those
intended by the manufacturer.
• NEVER operate this device if there is a damaged cord
or plug, the unit is not working properly, or it has been
dropped, damaged, or exposed to water.
• Always keep this device and cord away from water AND
heated surfaces.
• NEVER wrap the cord around the device.
• NEVER leave this product unattended when plugged in.
• DO NOT operate this product around children or pets;
do not operate around aerosol products or where
oxygen is being administered.
• Plates are HOT. Avoid contact with skin or other
sensitive body areas. Use ONLY on hair.
• DO NOT place a hot or cooling device on any
unprotected surface.
MAINTENANCE
Daily Maintenance:
For the safe use of the iron, check the
following daily:
• Check the cord and surface of the cord. Never use if any
parts are cracked, split, torn or damaged.
• Check the plug and never use if it is cracked, split, or
damaged.
• Check the plug pins and never use if transformed or
damaged.
• Check the controller and do not use if cracked, split,
broken, or damaged.
• When not in use, clean and dry the entire iron and store in
a cool, dry place.
When ready to use, follow the directions for daily maintenance.
Daily Cleaning:
To keep the plates clean after each use, unplug
the iron from the power source and, once the plates are cool,
wipe them down with a hot, damp towel.
WARNING:
Do not wipe the iron with thinner, benzene, gasoline,
lamp oil, or other solvents or chemicals, as that may cause
accidents or malfunction, and may damage the iron and void the
warranty.