11
01/2022
·
Technische Änderungen vorbehalten
·
Technical data can be changed without prior notice
·
Des changements techniques reservés
·
Мы оставляем за собой право на технические изменения и
дополнения, а также возможные опечатки.
·
104.8198
English
Five options of frost protection
1. Heating element 24 V, for installation into the trough
(see separate mounting instructions)
Heating element 24 V, 180 W (131.6063) for installation into the trough.
131.6063
2. Heating element 24 V, for installation under the trough
(see separate mounting instructions)
Heating element 24 V (131.6060, 131.6061, 131.6062) for installation under the trough. For power supply a SUEVIA Transformer 230/24 V is
necessary. For automatic switch on/off of transformer a thermostat (101.0389) can be additionally installed. To ensure a frost-free feed pipe, a frost
protection heating cable 24 V, 20 W, 2 m (101.0861), or a 24 V, 30 W, 3 m (101.1863) has to be used. The heating cable should be wrapped around
the pipe and connected to the heating element of the drinker in parallel to the power supply cable, coming from the transformer. If this heating cable
is installed on plastic pipes, make sure that this water pipe is suited for warm and cold water. For better heat distribution the water pipe has to be
wrapped first with an aluminium adhesive tape (101.1099). The frost protection heating cable and the supply line should be protected against animal
bites or other damages.
131.6062
131.6061
131.6060
3. Connection to a water circuit with a circuit pipe
¾" circuit pipe (131.6064) or 1" circuit pipe (131.6110, 131.6111, 131.6112, 131.6113) suited for installation into quick drainage troughs
(manufactured as of 12.2014). Frost protection is reached for the water line as well as for the water in the trough, if connected to a water circuit with
a SUEVIA heating unit.
131.6064
131.6110 · 131.6111 · 131.6112 · 131.6113
1"
¾"
¾"
¾"
101.0861
101.1863
131.6064
131.6110
131.6111
131.6112
131.6113
131.6063