11
- Remove Knock Out Cup By loosening
the Knock Out Knob while holding the
other end of the bolt with the speed driver
provided with the machine.
- All of the parts that were removed from the
machine can now be washed and sanitized
thoroughly. USDA recommends the sanitizing
solution should be 50 parts per million chlorine,
but no more than 200 parts per million. The
machine itself should be cleaned and sanitized
by hand. After all Parts are clean they should
be coated in mineral for added protection.
DO NOT HOSE DOWN OR PRESSURE
WASH THIS MACHINE!
Knock Out Knob
Knock Out Cup
Disassembly
Tool
*To Re-Assemble the Machine reverse the above procedure. Hopper bolts
should only be hand tightened with the speed driver provided.
*The Knock Out Cup Should be installed on the Machine after all other
parts are in place. The Mold Plate should be all the way forward and the
Knock Out Arm should be in the down position for the cup to align with
the Mold Plate properly.
Installing Patty Paper on Interleaver:
Place a stack of paper no thicker than one
inch under the Pressure Foot. Slide paper
hole in paper over center pin on. This can
be accomplished without stopping the
machines movement.
*Placing more than one inch of paper
on center pin may cause improper
paper feeding.
Center Pin
Pressure
Foot
Patty-O-Matic Inc. offers the highest quality patty paper, machine lubricant, and
machine grease. Please contact the factory for information on these products.
Toll Free in the U.S.A. 877-938-5244
Outside the U.S.A. 732-938-2757
P.O. Box 404 Farmingdale, NJ 07727
Email: [email protected]
Website: www.pattyomatic.com
Paper Sleeves should be adjusted for different size patty paper
Paper Sleeves
