SmartNode SN5530 Overview
20
SmartNode 5530 User Manual
1
• General Information
Table 3. LED Definitions
LED
Description
Note
If an error occurs, all LEDs will flash solid for MORE
than 5 seconds before the device reboots
Power
When lit, indicates power is applied. Blinks fast during bootloader phase
and blinks slow during boot process of Trinity Software. Becomes solid
when the system is up and running.
VoIP Link
•
On indicates the gateway is registered to a SIP server, or, a SIP
device has registered to the SN5530.
•
Off indicates the unit is not configured or registered, or has no active
direct routed VoIP connection.
BRI 0 – BRI 7
•
On when L1 and L2 are active. Flashes when there are ongoing calls.
•
Off when no line or phone is connected or the port is shutdown.
ETH 0 – ETH1
•
On when the Ethernet connection on the corresponding port has a
link indication.
•
Flashes when data is received or transmitted at the corresponding
Ethernet port.
GIG 0 – GIG 1
•
On when the Ethernet is connected to a 1000Mb network.
•
Off when the Ethernet is connected to a 10Mb or 100Mb network or
not connected
AUX 1
AUX 2–AUX 4
Auxiliary LEDs for future use.
