9
About this guide
This guide describes the SmartNode 5200 hardware, installation and basic configuration. For detailed software
configuration information refer to the
SmartWare Software Configuration Guide
and the available Configura-
tion Notes.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 14 provides information about router features and capabilities
•
Chapter 2
on page 18 contains an overview describing router operation and applications
•
Chapter 3
on page 20 provides hardware installation procedures
•
Chapter 4
on page 25 provides initial procedures for configuring the SmartNode router
•
Chapter 5
on page 31 contains information on contacting Patton technical support for assistance
•
Appendix A
on page 34contains compliance information for the SmartNode
•
Appendix B
on page 36 contains specifications for the routers
•
Appendix C
on page 39 provides cable recommendations
•
Appendix D
on page 41 describes the router’s ports and pin-outs
•
Appendix E
on page 43 lists the factory configuration settings for SmartNode 5200
•
Appendix F
on page 48 provides license information that describes acceptable usage of the software pro-
vided with the SmartNode 5200
For best results, read the contents of this guide
before
you install the router.
Summary of Contents for SmartNode 5200
Page 18: ...18 Chapter 2 Applications overview Chapter contents Introduction 19 Typical application 19...
Page 39: ...39 Appendix C Cabling Chapter contents Introduction 40 Ethernet 40...
Page 41: ...41 Appendix D Port pin outs Chapter contents Introduction 42 Ethernet 42...
Page 43: ...43 Appendix E SmartNode 5200 factory configuration Chapter contents Introduction 44...
