Patton SmartNode 5200, User Manual

Page: 45 / 50

Introduction 45
SmartNode 5200 User Manual E • SmartNode 5200 factory configuration
default-router 1 192.168.1.1
domain-name-server 1 192.168.1.1
profile aaa default
method 1 local
method 2 none
context ip router
interface eth0
ipaddress 10.10.10.10 255.255.254.0
use profile napt NAPT
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface eth1
ipaddress 192.168.1.1 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
dhcp-server use profile DHCP
context cs switch
routing-table called-e164 fromSIPWAN
route default dest-service SERVICE-SIP-LAN
routing-table called-e164 fromSIPLAN
route 3.... dest-service SERVICE-SIP-LAN
route default dest-interface SIP-WAN
interface sip SIP-WAN
bind context sip-gateway GWSIP-WAN
route call dest-table fromSIPWAN
remote sip.local.com
interface sip SIP-LAN
bind context sip-gateway GWSIP-LAN
route call dest-table fromSIPLAN
local 10.10.10.10
service sip-location-service SERVICE-SIP-LAN
bind location-service LS-LAN
context cs switch
no shutdown
authentication-service AUTHSERV
username 37060 password qHDk6Ej6cAk= encrypted
username 37061 password qHDk6Ej6cAk= encrypted
username 37062 password qHDk6Ej6cAk= encrypted
username 37063 password qHDk6Ej6cAk= encrypted