manualshive.com logo in svg

Patton SL4020, Getting Started Manual

Share
Download
Patton SL4020 Getting Started Manual Download Page 40

5 • Telephony

SmartLink 4020 Getting Started Guide

40

SIP Extensions

Saving your work

When you are finished configuring SIP settings, click the 

Save SIP Settings

 button to save the changes.

SIP Extensions

Support PRACK method

Select to enable SIP PRACK support.

Encode SIP URI with user parameter

Select to encode user=phone parameter in SIP URI.

Send INVITE with Timer header

Select to encode Timer header in all INVITE requests for ringing timeout.

SIP session timer

Select to enable SIP session timer function.

Conditional Call Forwarding Timer

Forward the call to the pre-configured number if the phone does not pick up within the timer.

Disable Call Waiting

Don’t play call waiting tone.

Disable Caller-ID display

Don’t send out caller-id display for incoming calls.

Call Hold using C=0.0.0.0

Using the call hold method described in rfc 2543. If unchecked, the call hold would follow rfc 3263 method.

Summary of Contents for SL4020





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands