Patton FiberPlex FPX6000 Series, Quick Start Manual

Page: 7 / 20

FPX6000 Quick Start Guide 7
The FPX6000 is installed in the VESA mounting bracket. Refer to section 8.0, “Install-
ing Cables” on page 9.
5.0 Installing into a 19-inch Rack
Do the following to install up to two devices in a 19-inch rack using the rack-mounting
bracket (see
figure 5 ):
Figure 5. Rack-mounting bracket
1. Remove 4 screws from below the rear panel as shown in figure 6 .
Figure 6. Removing the 4 screws from the underside of the device
2. Use 4 mounting screws included with the bracket to secure the FPX6000 front panel
to the bracket at one of the mounting locations on the rack-mounting bracket (see
figure 7 on page 8).