Patton FiberPlex FPX6000 Series, Quick Start Manual

Page: 4 / 20

4 FPX6000 Quick Start Guide
•
FPX-001/VM1 VESA Mounting Bracket
3.2 Installation steps
Installation consists of the following steps:
1. Install the FPX6000 onto a mounting surface:
– For mounting on a VESA-compatible TV or monitor, refer to section 4.0, “Install-
ing the VESA mounting bracket on a TV or monitor” on page 4.
– For mounting the device in a 19-inch rack, refer to section 5.0, “Installing into a
19-inch Rack” on page 7.
– For mounting on a wall, refer to section 6.0, “Wall Mounting” on page 9.
– For mounting on a desktop or similar flat, sturdy surface, refer to section 7.0,
“Desktop Mounting” on page 9.
2. Install data and video cables onto the device. Refer to section 8.0, “Installing
Cables” on page 9.
3. Connect power to the device. Refer to section 9.0, “Connecting Power” on
page 12.
4. Install the Dante Controller software . Refer to section 10.0, “Installing the
Dante Controller Software” on page 13 to download* and install the software.
5. Configure the FPX6000 with the Dante Controller . Refer to section 11.0, “Config-
uring the FPX6000 with the Dante Controller” on page 15 to use the Dante Con-
troller to connect an FPX6000 transmitter and receiver
Refer to the FiberPlex FPX6000 Series User Manual (document #50000137) if you need
more information to install, configure, operate, or troubleshoot the FPX6000. It can be
downloaded here:
https://www.patton.com/manuals/50000137_fpx6000-um.pdf .
4.0 Installing the VESA mounting bracket on a TV or monitor
Do the following:
* Audinate account is required.
Mounting holes in the VESA mounting bracket align with the VESA standard
used by most TV and display manufacturers. The mount is compatible with 75,
100 or 200 mm VESA hole patterns (see
figure 1 on page 5).