background image

2

FPX6000 Quick Start Guide

1.0  Safety Information

1.1  Notation

In this guide, hazard levels are classified as follows:

1.2  Explanation of the Symbols

2.0  Operating Precautions

Indicates a potentially hazardous situation which, if not 
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not 
avoided, could result in minor or moderate injury.

NOTICE

Indicates potential risks of damage to the device or to property. 

Highlights a helpful tip to help the user work more efficiently. 

Symbol on the device indicates direct current (DC).

In accordance with the requirements of council directive 2002/96/EC on 
Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-
of-life you separate this product from other waste and scrap and deliver to 
the WEEE collection system in your country for recycling.

Indicates that the product conforms to regulations set out by the 
EC Directive.

To reduce the risk of fire or electric shock, do not attempt to 
remove the device’s outer cover. There are no user-service-
able parts inside. This device shall be returned to Patton Elec-
tronics for repairs or repaired by qualified service personnel.

For units with an external power adapter, the adapter shall 
be a listed Limited Power Source.

Summary of Contents for FiberPlex FPX6000 Series





















Reviews: