Patton CopperLink 2300 Quick Start Manual Download Page 14

14

CopperLink 2300 Quick Start Guide

A  Customer and Technical Support

Toll-Free VoIP support: call 

sip:[email protected]

 with a VoIP SIP phone 

Online support: 

www.patton.com

E-mail support: 

[email protected]

—answered within 1 business day

B  Compliance

B.1  EMC

FCC Part 15, Class A

EN55022, Class A

EN55024

B.2  Safety

UL 60950-1/CSA C22.2 N0. 60950-1

IEC/EN60950-1

AS/NZS 60950-1

B.3  PSTN Regulatory

FCC Part 68

CS-03

AS/ACIF S043:2003

C  FCC Part 68 (ACTA) Statement

This equipment complies with Part 68 of FCC rules and the requirements adopted by ACTA. On the bottom side of 
this equipment is a label that contains—among other information—a product identifier in the format 

US: 

AAAEQ##TXXXX

. If requested, this number must be provided to the telephone company.

The method used to connect this equipment to the premises wiring and telephone network must comply with the 
applicable FCC Part 68 rules and requirements adopted by the ACTA.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that 
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone com-
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with 
the FCC if you believe it is necessary.

Summary of Contents for CopperLink 2300

















Reviews: