Communicating With a System
51
Model 1195 Getting Started Guide
6 • GUI configuration
Communicating With a System
To communicate with the system, you have to make a connection with the system through a TCP or COM
port.
To select a
COM
port:
1.
Click on the
Option
menu at the top of the screen and select
TCP/COM (Single System)
.
Figure 12. Select COM port
2.
From the drop-down menu, select the COM port that is in use. The message “
COM X is selected
” will
display.
3.
Click
OK
.
To access the system remotely, select
TCP/IP Winsock
.
1.
Click on the
Option
menu at the top of the screen and select
Communication (Single System)
.
Figure 13. Select TCP/IP address
2.
From the drop-down menu, select the
TCP/IP Winsock
.
3.
Select the IP address of the equipment in the field
REMOTE HOST IP ADDRESS
.
