Model 1195 Overview
14
Model 1195 Getting Started Guide
1 • General information
Model 1195 FiberLink E1/Ethernet Mux is a point to point high performance optical line transmission
equipment, combines 8, ITU-T G.703 compliant standard electrical E1s plus 100BaseT Ethernet signal into
an optical data stream for transport over fiber optic pairs. Several transmitter options for different cable types
and wave-lengths are available. 1+1 optical path redundancy is offered and available as an option.
Features and Benefits
•
Integrated E1 Plus Ethernet Optical Multiplexer
•
Compact design that performs E1 and Ethernet channel multiplexing & de-multiplexing to an optical out-
put
•
Provides visible and audible alarm indication
•
Provide Remote power detection (RPD)
•
Low power consumption
•
Orderwire (EOW) channel for end to end installation and maintenance
•
Local and remote loop back test for diagnostics
•
1+1 Fiber Path protection
•
ALS (Auto Laser Shutdown) facility for eye safety
•
10/100M Ethernet Port - 100 Mbps Ethernet data transmission rate complies with IEEE 802.3
•
Supports auto negotiation and flow control (pause)
•
Clock options: internal/loop-timed
•
Provides visible and audible alarm indications
•
Local and remote loopback controls for diagnostics and troubleshooting
•
Local configuration management through RS232 Serial Port
•
Remote configuration and management through 10/100BaseT Ethernet
•
Port - Telnet (english text commands)
•
SNMP (V1 and V2C)
For Testing: Always Install Optical Attenuators. For distances of less than 10
km, optical attentuators must be intalled on the Optical Links. Otherwise, the
optics will be permanently damaged.
WARNING
Model 1195/8E1
Figure 1. Model 1195/8E1
