WAN Service Configuration
64
Models 2603, 2621, and 2635 Getting Started Guide
6 • WAN Services
2.
On the Menu, go to
Services Configuration
, then to
WAN.
Delete the factory default WAN services already
defined.
3.
Click on
Create a new service
in the main window, select “
Frame Relay routed”
and click on Continue.
4.
Enter the description for the circuit in the Description field. This is a mandatory field. Without a descrip-
tion you cannot create a WAN service. (See
figure 38
.)
Figure 38. Frame Relay routed configuration
–
Description:
FR routed
–
DLCI.
Enter DLCI number. Consult with your service provider for the DLCI number required.
–
Encapsulation Method.
Defines the RFC1490 encapsulation type that will be used by the channel.
Choose the encapsulation method best suited for your network needs from the following options:
– Routed IP (default value)
– Raw
–
WAN IP address.
Enter the IP address assigned to the WAN port (V.35, X.21, or T1/E1)
–
Enable NAT on this interface.
In this example leave this option blank
5.
Click the
Create
button.
6.
Go to
System Configuration > WAN > Edit
(for Frame Relay Routed service)
> Edit ‘IP Interface’
7.
Enter the WAN IP Address, in this example = 192.168.164.2, and click on the Create button.
8.
From the ‘IP Interface’ web page, click on
Edit ‘Frame Relay’,
then click on
Edit ‘Frame Relay Channel’
(See
figure 39
.)
