Setup Command Menu
75
Model 2160 Series Getting Started Guide
5 • Console and Telnet configuration
Line Probe
For adaptive mode applications, set the
Line Probe
to
Enable
. The Model 2160 will adapt the data rate accord-
ing to the line status. For all other applications, set the
Line Probe
to
Disable
.
Clear
Use the
clear
command to reset the CRC error count.
LAN
The
lan
command menu lists commands for setting up the LAN ports. Move the cursor “
>>
” to
lan
in the
setup
menu and press Enter.
-----------------------------------------------------------------------------
Command: setup lan <1~1>
Message: Please input the following information.
Interface number <1~1>: 1
-----------------------------------------------------------------------------
The default interface number is 1.
You can configure the Link type, LAN IP address and subnet mask for the LAN interface.
Table 20
shows the options available within the
lan
command menu:
-----------------------------------------------------------------------------
Command: setup lan 1 link_type <Disable|Dynamic|Static>
Message: Please input the following information.
Link type (TAB Select) <Disable>:
-----------------------------------------------------------------------------
Select the
lan 1 link_typ
e as
Disable
,
Dynamic
or
Static.
Then,
select
address
from the
lan
menu:
-----------------------------------------------------------------------------
Command: setup lan 1 address <ip> <netmask>
Message: Please input the following information.
IP address (ENTER for default) <192.168.2.1>:
Subnet mask (ENTER for default) <255.255.255.0>:
-----------------------------------------------------------------------------
Set the LAN IP address and subnet mask. The default IP Address is
192.168.2.1
and the default subnet mask
is
255.255.255.0
.
>>
link_type
Configure Link type
address
LAN address and subnet mask
Table 20. LAN Options
Menu
Options
Link Type
Disable
Dynamic
Static
IP Address
Subnet Mask
