Enable Command Menu
72
Model 2160 Series Getting Started Guide
5 • Console and Telnet configuration
Enable Command Menu
The
enable
command menu lists commands for setting up the Model 2160. Move the cursor “
>>
” to
enable
and press Enter. Type the supervisor password, which is
root
.
----------------------------------------------------------------------
Command: enable <CR>
Message: Please input the following information.
Supervisor password: ****
----------------------------------------------------------------------
In the
enable
sub menu, you can set up management features and upgrade software, back up the system config-
uration and restore the system configuration via utility tools.
To save your changes, you must write the new configuration to NVRAM and reboot the Model 2160 to work
with the new settings.
When you first log in to the Model 2160 with the supervisor password, the main menu displays:
Table 16
explains the commands available in the main
menu:
>>
enable
Modify command privilege
setup
Configure system
status
Show running system status
show
View system configuration
write
Update flash configuration
reboot
Reset and boot system
ping
Packet internet groper command
admin
Setup management features
utility
TFTP upgrade utility
exit
Quit system
Table 16. Enable Command Menu
Command
Description
enable
Change the configuration and write changes to nonvolatile RAM (NVRAM).
setup
Initially configure the Model 2160.
status
View the status of the Model 2160
show
Show the system and configuration
write
Update flash configuration. After you have completed all desired changes, make sure to
write the new configuration to NVRAM. Use the
write
command to save your changes
and reboot the system or all of your changes will not take effect.
reboot
Reset and reboot system. After you have completed all desired changes, make sure to write
the new configuration to NVRAM. Use the
reboot
command to restart the system or all of
your changes will not take effect.
ping
Check the connection to the Model 2160
admin
Set up advanced management features
utility
Upgrade software and backup/restore the current configuration
exit
Log out of the system
