Utility Options
62
Model 2160 Series Getting Started Guide
4 • Web configuration
Trap Host Pool
In the table of current trap host pool, you can set up the trap host. SNMP trap is an informational message
sent from an SNMP agent to a manager. It is a management station (SNMP application) that receives traps. If
you don’t define a trap host pool, then no traps are issued.
Click
Modify
to set up the trap host pool.
Figure 39. Trap host pool configuration
•
Version:
Select version for trap host. (Version 1 is for SNMPv1; Version 2 for SNMPv2; Disable–Turn off)
•
IP Address:
Enter the trap host IP address
•
Community:
Enter the community password.
Click
OK
to finish the setup. The browser will prompt the configured parameters and check it before writing
into NVRAM. Press
Restart
to reboot the Model 2160 with the new settings. Click
Continue
to configure
other options.
Utility Options
This section allows you to manage utility options for the Model 2160, including system infor-
mation, the configuration tool, upgrade information, log out of the system, and restart the sys-
tem.
System Information
To review system information, click
System Info
in the
Utility
menu.
Figure 40. System Information page
