![background image](http://html2.mh-extra.com/html/patton-electronics/4520/4520_getting-started-manual_4038151048.webp)
4 • Getting started with the SmartNode
Model 4520 & 4110 Series Getting Started Guide
48
Bootloader
172.16.1.99(if-ip)[eth0]#
After the SmartNode has been rebooted the new start up configuration will be activated.
172.16.1.99(if-ip)[eth0]#reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-config'?
Press 'yes' to store, 'no' to drop changes : no
Press 'yes' to restart, 'no' to cancel : yes
The system is going down
Bootloader
The bootloader ensures that basic operations, network access, and downloads are possible in case of interrupted
or corrupted application image downloads. It also offers console access to the Bootloader and the capability for
downloading application images (e.g. SmartWare) via the serial link of the console.
Start Bootloader
To start the Bootloader, power on the SmartNode while pressing the reset button. Open a Telnet session to the
SmartNode via one of the Ethernet interfaces, or open a CLI session via the console port (if available on the
SmartNode). The login display will appear. Using the credentials admin / patton, log in to the SmartNode.
The following prompt will be displayed:
RedBoot>
Type
help
to display an overview of the available commands.
Summary of Contents for 4520
