138001UA
2-3
S
ETUP
& I
NSTALLATION
P
ATTON
E
LECTRONICS
C
O
.
I
NSTALLATION
A
ND
O
PERATIONS
M
ANUAL
3046
LCD SYSTEM STATUS Display
During normal operation the 3046 (CTS DDS-MUX) will be in the
SYSTEM STATUS
display.
This display indicates synchronization with the remote end by the
SYNC
message
1 0 1 3 A 0 0 1
SYSTEM STATUS
SYNC --- ----
If the two 3046s (CTS DDS-MUX) are not in sync, the display will indicate this by displaying
dashes where the
SYNC
message is.
1 0 1 3 A 0 0 1
SYSTEM STATUS
---- --- ----
When the 3046 (CTS DDS-MUX) is in sync it can receive a loopback command from the
remote end of the link. This Remote Digital Loopback command is indicated on the LCD in
the Middle of the
SYSTEM STATUS
display as
RDL
.
SYSTEM STATUS
SYNC RDL ----
1 0 1 3 A 0 0 1
If any channel is looped back within the 3046 (CTS DDS-MUX), an indication is displayed
in the last position of the
SYSTEM STATUS
display, indicating that some loopback condition
exists at the originating end with the
LOOP
message.
SYSTEM STATUS
SYNC --- LOOP
1 0 1 3 A 0 0 1
Composite Link Configuration
The composite configuration allows the selection of DDS rate and number of active
channels provided by the 3046 (CTS DDS-MUX). The current setting is identified by an
asterisk next to the values in the shown on the bottom line in the last position.
1 0 1 3 A 0 0 2
CH PARAM VAL
COMP SPEED 19.2*