Patton electronics 2720/I Series User Manual Download

Page: 4 / 48

1.3 INDUSTRY CANADA NOTICE

The Canadian Department of Communications label identifies cer-

tified equipment. This certification means that the equipment meets
certain telecommunications network protective, operational and safety
requirements. The Department does not guarantee the equipment will
operate to the user's satisfaction. Before installing this equipment,
users should ensure that it is permissible to be connected to the facili-
ties of the local telecommunications company. The equipment must
also be installed using an acceptable method of connection. In some
cases, the company’s inside wiring associated with a single line individ-
ual service may be extended by means of a certified connector assem-
bly (telephone extension cord). The customer should be aware that
compliance with the above condition may not prevent degradation of
service in some situations. Repairs to some certified equipment should
be made by an authorized maintenance facility designated by the sup-
plier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment. Users should
ensure for their own protection that the ground connections of the
power utility, telephone lines and internal metallic water pipe system,
are connected together. This protection may be particularly important
in rural areas.

1.4 FCC PART 68 COMPLIANCE STATEMENT

The Model 2720 Series has been tested and registered in compli-

ance with the specifications in Part 68 of the FCC rules. A label on the
equipment bears the FCC registration number. You may be requested
to provide this information to your telephone company. Your telephone
company may make changes in its facilities, equipment, operations or
procedures that could affect the proper operation of the Model 2720
Series. If this happens, the telephone company should give you
advance notice to prevent the interruption of your service. The tele-
phone company may decide to temporarily discontinue your service if
they believe your Model 2720 Series may cause harm to the telephone
network. Whenever possible, they will contact you in advance. If you
elect to do so, you have the right to file a complaint with the FCC. If
you have any trouble operating the Model 2720 Series, please contact
Patton Electronics Technical Support 301-975-1000. The telephone
company may ask you to disconnect the equipment from the telephone
network until the problem has been corrected or until you are certain
that the Model 2720 Series is not malfunctioning. In accordance with
FCC rules and regulation CFR 47 68.218(b)(6), you must notify the
telephone company prior to disconnection. The following information

may be required when applying to your local telephone company for
leased line facilities. The Universal Service Order Code (USOC) is
RJ48. The Facility Interface Codes (FIC) are 04DU9-BN, 04DU9-DN,
04DU9-1KN, and 04DU9-1SN. The Service Order Code (SOC) is 6.0N.

1.5 SERVICE INFORMATION

All warranty and non-warranty repairs must be returned freight

prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support at: tel:

(301) 975-1007

email:

[email protected]

www:

http://www.patton.com. NOTE:

Packages received without an RMA number will not be accepted.
Patton Electronics' technical staff is also available to answer any ques-
tions that might arise concerning the installation or use of your Patton
Model 2720. Technical Support hours:

8AM to 5PM EST, Monday

through Friday.

CAUTION:

Users should not attempt to make such connections

themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.

Facility
Interface

Service Network

Service

Code

Connection

1.544 Mbps SF format without line power

04DU9-BN