15
16
3.2.1 Introduction to Main Menu
After entering the password, you may access all of the system’s
functions and parameters. The Main Menu looks like this:
HELPFUL HINTS
1.
To make a selection, key the highlighted letter that corre-
sponds to a menu selection.
2.
To execute the selection, type [Enter/CR]
3.
To toggle between options on a highlighted selection, Press
[space].
4.
Select Save Changes from Main Menu after making modi-
fications to any Model 2720 parameter. Otherwise, changes
will be lost when the Model 2720 is turned off.
The Main Menu options are briefly described below.
System Configuration
options allow you to change various
aspects of the Model 2720’s operation, e.g., framing, line cod-
ing, and aggregate bandwidth.
System Diagnostics/Statistics
options allow you to monitor
the network performance, initiate V.54 loops, local loops, and
send test patterns. Network performance parameters are
updated once a second, giving you the ability to quickly deter-
mine if there is a problem.
Unit Options
allow you to customize the Model 2720 for your
location. You can change the default header names to give
each unit a unique name and password. Also, you can reset
the unit to its default settings without the manual. It also has a
Service Information screen in case you need technical assis-
tance from Patton Electronics.
Save Changes.
Once you have configured the unit to your
satisfaction, you can save the changes permanently by exe-
cuting the Save Changes command. This will update the unit’s
configuration and save all the parameters to permanent mem-
ory.
Logoff.
For security, log off the control menu by executing
the Logoff command. This will blank the screen until an
[Enter] key is pressed.
d
a
b
c
d
e
Summary of Contents for 2720/I Series
Page 45: ......
Page 46: ......
Page 47: ......
Page 48: ...Copyright 2001 2007 Patton Electronics Company All Rights Reserved...
