5
6
1.6 SERVICE INFORMATION
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support at:
NOTE: Packages received without an RMA number will not be
accepted.
Patton Electronics's technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Patton Electronics Model 2710A. Technical Services hours: 8AM to
5PM EST, Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
One Year parts and labor. If any questions arise during installation or use
of the unit, contact Patton Electronics Technical Support 301-975-1000.
2.1 FEATURES
• Functions as a T1/FT1 to V35 converter
• Terminates T1/FT1 Circuits over a 4-Wire RJ-48C interface
• Connects to standard CPE Serial Interfaces
• Common Framed nx56/64 rates up to 1.536 Mbps
• Unstructured Rates at 1.544 Mbps
• D4 or ESF Framing Modes
• Supports AMI or B8ZS/B7ZS Line Coding
• Configuration via Software Control Port or Internal DIP Switches
• Seven Easy-to-Read LED Indicators Monitor Data & Diagnostics
• Internal, External or Receive Recover Clocking
• Also Operates as a High-Speed Point-to-Point Modem
• Compact Size Plugs Directly into a Router, Switch or other DTE
• Made in USA
2.2 GENERAL PRODUCT DESCRIPTION
The Model 2710A Series are single port T1/FT1 CSU/DSUs that pro-
vide V35 Conversion and high-speed WAN connectivity in an ultra-com-
pact housing. Plugging directly into the V.35 WAN port of a switch, router
or multiplexer, the Model 2710A provides T1 or FT1 access at connection
at data rates of 1.544 Mbps, nx64, and nx56 (n=1 to 24 channels). The
Model 2710A is an excellent choice when terminating leased line servic-
es, Frame Relay backbones, internet access as well as LAN-to-LAN serv-
ices.
The Model 2710A provides digital access to a local WAN service
provider or directly between two facilities over a dedicated 4-Wire circuit.
LAN bandwidth, framing and coding options are programmed via internal-
ly accessible DIP switches or via a rear-mounted EIA-232 control port.
The Model 2710A supports D4/ESF framing options and AMI/B8ZS/B7ZS
line coding. Model 2710A also supports a full range of system and diag-
nostic features that make system setup easy.
The Model 2710A provides T1 terminations over a modular RJ-48C
jack and complies with jitter tolerance capabilities as specified in ANSI
T1.403 and AT&T TR62411. A network crossover cable is provided for
converter applications and an M/34 to DB-60 adapter cable is available
for convenient connection to Cisco routers. External power options
include 120VAC and Universal Interface 100-240VAC. 48VDC and rack
card versions are available by special order.