background image

1.4   SERVICE INFORMATION

All warranty and non-warranty repairs must be returned freight

prepaid and insured to Patton Electronics.  All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support at: 

tel:  (301) 975-1007
email:  [email protected]
www:  http://www.patton.com.

NOTE: Packages received without an RMA number will not be
accepted.

Patton Electronics' technical staff is also available to answer any

questions that might arise concerning the installation or use of your
Patton Model  2094.  Technical Services hours:  8AM to 5PM EST,
Monday through Friday.

4

1.2  RADIO AND TV INTERFERENCE

The Model 2094  generates and uses radio frequency energy, and

if not installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and tele-
vision reception.  The Model 2094  has been tested and found to com-
ply with the limits for a Class A computing device in accordance with
the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation.  However, there is no guarantee that interfer-
ence will not occur in a particular installation.  If the Model 2094  does
cause interference to radio or television reception, which can be deter-
mined by disconnecting the cables, the user is encouraged to try to
correct the interference by one or more of the following measures:
moving the computing equipment away from the receiver, re-orienting
the receiving antenna, and/or plugging the receiving equipment into a
different AC outlet (such that the computing equipment and receiver
are on different branches).

1.3  CE NOTICE

The CE symbol on your Patton Electronics equipment indicates

that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU).  A Certificate of Compliance is available by contacting Technical
Support.

3

Summary of Contents for 2094





















Reviews: