6
always feel comfortable.
Getting out the Buggy:
ensure the parking brakes are on; if possible, place the back of the buggy against a wall or immovable object (alternatively, another helper may hold the
pushchair steady); unfasten safety belt and lift the child carefully.
Negotiating the Kerb or Single Step:
down
- take the rear wheels to the edge of the kerb, hold the handles firmly and tip the buggy slightly backwards. Balance on the rear wheels, lower the
buggy down the kerb on its rear wheels. Never tip the buggy forward at a kerb.
up
- take the rear wheels to the kerb. With a firm grip on the handles, tip the buggy backwards and place the rear wheels on top of the kerb. Position the
front wheels at the kerb bottom and lift to the upper level.
Negotiating Steps:
-
make use of ramps and lifts when they are available
-
where possible steps should be avoided, if there is no alternative to negotiating steps then ensure at least one helper is available to give assistance
-
do not attempt to take the buggy up or down a flight of steps unless you and your helper are sure you have control of the buggy and can take the weight
of its occupant
-
during this operation, the attendant and helper must be well balanced and have secure grip on the buggy
-
the attendants hands must be inside the handle straps at all time
-
take rests in regular intervals
-
do not lift the buggy with footrest
going down steps
- position the buggy squarely with the front wheels on the top step, tilt the handle backward and push the buggy forward until the rear
wheels are at the top step; the helper stands in front, steadies and lowers the buggy by gripping the front frame; take the weight and lower the rear wheels
down the step, continue step by step to the bottom. (picture no. 1)
going up steps
- position the buggy squarely with the rear wheels against the bottom step, tilt the buggy backward and raise to the next step, the helper
stands in front, steadies and lifts the buggy by gripping the front frame, continue step by step to the top (picture no. 2)
Folding the buggy:
unfasten the dry zipper of armrest upholstery, unlock rear brace by pushing up on centre of brace. (Unlock the seat brace - size 38) Grasp one handle and
pull up the seat tube with other hand. Lock the storage clip. Is not necessary to uninstall the footrest for folding the buggy. (Picture no.3)
Upholstery:
the seat, seat reinforcement, backrest and backrest extension are not detachable. You could clean them by warm water and mild detergent.
Armrests:
undo the velcro and button to uninstall the armrests upholsteries.
Wash by hands on max. 40°C with mild detergent.
Seat reinforcement:
you could increase or decrease the seat rigidity by adjustment of the seat reinforcement. Lengthen the belts of seat reinforcement to decrease the rigidity.
Shorten the belts of seat reinforcement to increase the rigidity. Never change the seat width by adjusting of the seat rigidity.
MAINTENANCE
-
your buggy has been designed to a high standard and with correct use and maintenance will give many years of trouble free service
-
regularly inspect locking devices, catches, footrest, joints fixings to ensure they are secure and in full working order
-
brakes, wheels, tires are subjects to wear and should be replaced if necessary by a repairer approved by the buggy supplier
-
we recommend that the buggy is checked by an approved repairer every 12 month.
-
if the buggy is damaged or in need of repair, the approved repairer will be able to advise on what is required.
-
alternatively, PATRON Bohemia a.s. Customer department is available for product information.
-
only PATRON Bohemia a.s. replacement parts should be used on this buggy.
-
should parts of your buggy become stiff or difficult to operate )or not
later than every 6 month), ensure that dirt is not the cause, apply a light
application of a spray lubricant e. g. WD 40 (do not use oil or grease). Ensure that the lubricant penetrates between the components but do not over
spray as this may encourage the accumulation of dirt. Wipe off any access spray. Regular lubrication of moving parts will extend the life of your
buggy and take opening and folding easier.
-
make sure that you are familiar with the operation of the buggy. It should always open and fold easily. If it does not, do not force the
mechanism -
stop and read the instructions.
-
wheels, plastic and metal parts may be sponged clean with warm water and mild detergent.
-
the seat fabric can be washed by hands (max. 30°C).
-
never clean with abrasive, ammonia based, bleach based or spirit type cleaners.
-
after exposure to damp conditions, dry off with a soft cloth and leave fully open in warm environment.
-
store your buggy in a dry, safe place.
-
Check and tighten the screw connections regularly.
-
If there are used control cables (brakes, telescopes, tilt), check it regularly and, if necessary, set up and oil them.
PATRON Bohemia a.s. reserves the right to make design changes to any of their products without prior notice as a
part of their continuous development program.
15
Summary of Contents for CORZO Xcountry 30
Page 3: ...18 3 Obr 1 Obr 2 Obr 3...
