-6-
back drafting carbon monoxide fumes.
If the Filter Change Light illuminates during the remediation process, immediately change the
HEPA/Activated Carbon Filter.
Tipping Hazard
•
Use caution when stacking units.
•
Do not stack more than 3 units on top of each other.
•
Falling equipment could cause bodily harm.
SAFETY NOTES
•
Always unplug the unit prior to performing any maintenance.
•
Check the power cord for damage (fraying, cuts, etc.) before use.
•
To avoid electric shock, never use a water hose or pressure washer to clean the electrical
components.
•
Check the pre-filter prior to operating the machine to ensure it is not clogged. If there is any sign of
airflow restriction change the filter.
•
Make sure the unit is dry prior to installing clean filters.
•
When using the air scrubber for remediation purposes, replace both filters at the same time and
always clean machine in between jobs. This will help prevent cross contamination.
WARNING!
WARNING: To reduce the risk of electric shock, do not expose to water or rain.
WARNING: NOT SUITABLE FOR USE WITH SOLID-STATE SPEED CONTROLS.
To reduce the risk of electric shock, connect only to an outlet provided with a ground
fault circuit interrupting device.
CAUTION: To reduce the risk of electric shock, connect only to an outlet provided with
a ground fault circuit interrupting device.
WARNING - Skin or eye damage may result from directly viewing the light produced
by the lamp in this apparatus. Always disconnect power before relamping or
servicing. Replace lamp with lamp ZW4S15W-Z135, DC20V, 160mA 100-280nm.
