background image

PATON VDI SERIES ECO DC MMA                            

- 18 -

 

 
WARNING!!!

 

The warranty period is extended for the period of the warranty 

service machine to the service center.

 

 

14. INFORMATION CONCERNING DISPOSAL OF EQUIPMENT

 

 

(applies to households)

 

 The symbol shown on the product indicates that the appliance can not 
be disposed of in the same way as household waste. The device must be 
returned to the point of disposal of electrical equipment where it will be 
accepted free of charge. Information on such collection points for used 
equipment can be found on eg websites.  
Proper disposal helps preserve valuable natural resources and avoid 
environmental contamination. Failure to comply with the above 
recommendations may result in the imposition of fines in accordance 
with applicable regulations. 
 
If you would like to return the unit for disposal, please contact your nearest point of sale or contact the 
importer of the equipment for further information. 
 

 

IMPORTER / AUTHORIZED DISTRIBUTOR EU

 

=

 

25, Tadeusza Boya – Żeleńskiego Street, 

Rzeszów City, Poland zip-code 35105 

Tel. +48 (17) 779 00 67 

e-mail: 

[email protected]

 

            

www.paton.com.pl

 

 

All rights reserved. This document is protected by copyright. Copying or distributing the User Manual 
in whole or in excerpts without 

MasterWeld

 permission is prohibited. 

 

 

15. ACCEPTANCE CERTIFICATE 

Inverter rectifiers 

PATON™ VDI

-_________

E

 

The serial number ______________

ECO

 complies with the harmonized standards and is fit for use. 

 
Date of sale "___" ____________ 20___ year 
 
 
                      Stamp here                           _____________________ 

 

 

 

 

 

(signature of the seller) 

 

================================================================================ 

 

 

Summary of Contents for VDI-160E





















Reviews: