Paton STANDARDTIG-160, User Manual

Page: 81 / 115

- 79 -
PATON StandardTIG DC MMA/TIG/MIG/MAG
Connection to the mains/power distribution panel (at 25°C):
CAUTION! Please, pay attention to wall wires and other extension cords
Used MMA electrode
Set current value
for MMA and TIG Wire cross-section
diameter for MIG/MAG
Cross-section of the
mains wire, sq. mm
Max. wire
length, m
StandardTIG-160, StandardTIG-200, StandardTIG-250
Ø 2 mm not more than 80А not more than Ø 0,6 mm
1,0 75
1,5 115
2,0 155
2,5 195
4,0 310
Ø 3 mm not more than 120А not more than Ø 0,8 mm
1,5 75
2,0 105
2,5 130
4,0 205
6,0 310
Ø 4 mm not more than 160А
not more than Ø 1,0 mm
2,0 75
2,5 95
4,0 155
6,0 230
Ø 5 mm not more than 200А
2,5 60
4,0 100
6,0 150
Ø 5 mm
Ø 6 mm fusible
up to 250А up to Ø 1,2 mm
2,5 48
4 80
6 120
3 x 380/400V – StandardTIG-270-400V, StandardTIG-350-400V
Ø 3 mm not more than 120А not more than Ø 0,8 mm
1,5 135
2 175
2,5 220
4 350
6 525
Ø 4 mm not more than 160А
not more than Ø 1,0 mm
2 130
2,5 160
4 260
6 385
Ø 5 mm not more than 220А
2,5 115
4 180
6 270
Ø 6 mm
fusible
not more than270А not more than Ø 1,2 mm
2,5 85
4 135
6 205
Ø 6 mm up to 350А up to Ø 1,4 mm
2,5 65
4 100
6 150
ATTENTION! Supply button on the rear panel of the machine (for StandardTIG-160/200/250) is not a power
button, so it does not provide complete de‐energization of internal electronic parts, when the machine is
switched off. Therefore, in accordance with safety rules, disconnect the plug from the mains after completion
of welding.