Paton STANDARDTIG-160, User Manual

Page: 110 / 115

PATON StandardTIG DC MMA/TIG/MIG/MAG
- 108 -
10. STORAGE
Store the conserved and packaged source under storage conditions 4 in accordance with
GOST 15150-69 for a period of 5 years.
The de-conserved source should be stored in dry closed premises at an air temperature not
lower than +5
0
С . The premises should be free of acid vapours and other active substances.
11. TRANSPORTATION
The packed source is suitable to be transported by all transport means ensuring its safety in
compliance with the transport rules established for the applicable type of transport.
12. SCOPE OF SUPPLY
1. Arc power source with mains cable - 1 pc;
2. Shoulder strap - 1 pc;
3. User manual - 1 pc;
For StandardTIG-160/200:
- TIG torch ABICOR BINZEL, 4 m - 1 pc;
- Welding cable with ABICOR BINZEL ground terminal, 3 m - 1 pc;
For StandardTIG-160/200/250:
- Branded PATON plastic case - 1 pc.
13. SAFETY RULES
GENERAL PROVISIONS
The welding unit is manufactured in accordance with technical standards and established
safety rules. However, if handled incorrectly, there is a hazard of:
- injury to service personnel or a third party;
- damage to the
unit itself or to the company’s material assets;
- disruptions to an effective workflow.
All persons involved in the commissioning, operation, care and maintenance of the unit must
- be appropriately certified;
- have expertise in welding;
- strictly follow these instructions.
The malfunctions that could impair safety must be urgently rectified.
USER RESPONSIBILITIES
The User undertakes to admit to work on the welding unit only the persons who:
- reviewed the basic safety rules, received training on the use of welding equipment;
- read the Section "Safety instructions" and the instructions on necessary precautions given
in this manual, and confirm this with their signature.
PERSONAL PROTECTIVE EQUIPMENT