PATON
MultiPRO series
DC MMA/TIG/MIG/MAG
- 40 -
welding machine must be checked for insulation integrity by an electrical engineer
on a regular basis;
- when using the machine, never remove its outer case.
INFORMAL SAFETY MEASURES
- the manual must be always stored near the place where the welding machine
is used;
- in additional to the manual, adhere to general and local safety and
environmental rules;
- all instructions on the welding machine shall be kept readable.
STRAY WELDING CURRENTS
- make sure that the “mass” cable terminal is securely connected to the work
piece;
- if possible, avoid installing the welding machine directly on the conductive
coating of floor or work table, use insulating pads.
SAFETY MEASURES IN NORMAL CONDITIONS
Check the machine for external damages and performance of safety devices at
least once a week.