PATON
MultiPRO series
DC MMA/TIG/MIG/MAG
- 34 -
a) 0.1 ... 1.0s (increment 0.1s)
3) [Ar.F] Arc Force power = 40% (by default)
a) 0[OFF] ... 100% (increment 1%)
4) [u.AF] Arc Force trigger level = 12V (by default)
a) 9 ... 18V (increment 1V)
5) [BAH] current‐voltage curve slope = 1.4V/A (by default)
a) 0.2 ... 1.8V/A (increment 0.4V/A)
6) [Sh.A] short arc welding = OFF (by default)
a) On
b) OFF
7) [BSn] voltage reduction unit = OFF (by default)
a) On
b) OFF
8) [Po.P] current pulsing power = OFF (by default))
a) 0[OFF] ... 80% (increment 1%)
9) [Fr.P] current pulsing frequency = 5.0Hz (by default)
a) 0.2 ... 500Hz (dynamic increment 0.1Hz … 1Hz)
10) [dut] mark‐to‐space ratio (duty ratio) is the ratio of larger current cycle to pulse
spacing in percent = 50% (by default)
a) 20 ... 80% (increment 1%)
TIG welding mode
0) [-2-] main parameter CURRENT = 100A (by default)
a) 12 ... 250А (increment 1А)
1) [But] torch button mode = [2T] (by default)
a) [LFt] – contact striking mode TIG‐LIFT
b) [2t] – non‐contact striking mode, TIG‐2T button mode
c) [4t] – non‐contact striking mode, TIG‐4T button mode
2) [t.Pr] pre‐purging with shielding gas time = 0.1s (by default)
a) 0.1 ... 25.0s (increment 0.1s)
3) [t.Po] post‐purging with shielding gas time = 3.0s (by default)
a) 0.1 ... 25.0s (increment 0.1s)
4) [Pr.A] preliminary current (pilot arc) = 20A (by default)
a) 12 ... 50А (increment 1A)
5) [Po.A] crater filling current = 20А (by default)
a) 12 ... 50А (increment 1A)
6) [t.uP] current fade‐in time = OFF (by default)
a) 0[OFF]... 15.0s (increment 0.1s)
7) [t.dn] current fade‐out time = OFF (by default)
