Patlite PHC-D08, User Manual

Page: 25 / 30

5
25
5. Specifications
5.1. General Specifications
Model
PHC-D08 AC Adapter included
PHC-D08N AC Adapter not included
Rated Voltage 24V DC (Main Unit) 5V DC (USB Bus Power)
AC Adaptor Input: 100V - 240V AC (50/60Hz) Output: 24V DC
Operating Voltage Range 90V - 264V AC (With AC Adaptor used)
Rated Current
Consumption
Standby 7mA (at 24VDC) 18mA (at 5VDC)
Maximum 600mA (at 24VDC) 330mA (at 5VDC)
Rated Power
Consumption
Standby 0.4W (at 100VAC) 0.2W (at 24VDC) 0.1W (at 5VDC)
Maximum 16W (at 100VAC) 14.5W (at 24VDC) 1.8W (at 5VDC)
Operating Ambient Temperature 0
o
C - +40
o
C
Operating Ambient Humidity Range 20% - 85%RH (No dew or condensation accumulation)
Storage Ambient Temperature Range -10
o
C - +60
o
C
Storage Ambient Humidity Range 20% - 85%RH (No dew or condensation accumulation)
Mounting Location Indoor Only
Mounting Direction Upright
Protection Rating IP 20
Insulation Resistance More than 10MΩ at 500VDC between the terminals and the chassis
Withstand Voltage 1500VAC for 1min between terminals (10mA or less) and chassis without breaking insulation
Mass (Tolerance ±10%) 370g
Outer Dimensions Refer to Outer Dimensional Drawing
Compliance Standards
RoHS Directive (EN 50581)
Conforms to the CE requirements: (EN 55022 (ClassA), EN 55024)
FCC Part 15 Subpart B Class A
UL/CSA 60950-1 (For PHC-D08N)
Interface
USB Port USB 2.0 Conformity (supports Bus Power) Standard B Type (Female)
Serial Port RS-232C Conformity D-Sub 9 pin (Male)
Communication
Method
USB Port CDC (Communication Device Class) Protocol
Serial Port Asynchronous (Baud Rate: 9600bps, No Parity, Stop Bit=1bit, Data Length: 8bit, No Flow Control)
External Contact Output Screwless Terminal Block
Number of Contacts 8 Contacts
Contact Specifications Non-voltage Contact (Normally Open)
Rated Voltage 30VDC
Rated Current 3A
Failure Rate P Level 5VDC/ 10mA (at a switching rate of 120 operations per minute)
Applicable Wires
Solid: Φ0.4mm - Φ1.2mm (AWG26 - AWG18) Stranded: 0.2mm
2
- 0.75mm
2
(AWG24 - AWG20)
Element Wire Diameter: Φ0.18mm or more
Power Output
Screwless Terminal Block; 24VDC/500mA or less
Applicable Wires
Solid: Φ0.4mm - Φ1.2mm (AWG26 - AWG18) Stranded: 0.2mm
2
- 1.25mm
2
(AWG24 - AWG16)
Element Wire Diameter Φ0.18mm or more
Control Unit
“Clear” Switch, “Set” Switch
Accessories
AC Adaptor (PHC-D08 only), Installation Manual, Rubber Feet
Options
None