87
1.Be sure to remove the waterproof packing, from
the Compatible Direct Mount Bracket.
2. Insert the mounting screws of the product into
the Compatible Direct Mount Bracket.
See the figure on the left for details on the direction
of insertion.
3. Secure the product with the flanged nuts (3 pcs.)
from underneath the Compatible Direct Mount Bracket.
4. Put the waterproof packing on the Compatible Direct
Mount Bracket
bottom.
Push until the waterproof packing hits the Compatible
Direct Mount Bracket bottom.
Product Attachment (SZW-950U Mounting Hole A)
Compatible Direct Mount Bracket
Compatible Direct Mount Bracket
Flanged nut (3 pcs.)
Waterproof Packing
Installation using materials other than the specified
accessories is not covered under warranty.
Do not use if twisting, etc., has occurred in the
waterproof packing.
Failure to comply will result in lower waterproofing
performance. Possible cause of failure may occer.
N o t i c e
0.6 N m
Recommended Torque
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
