20
LR5
Steel Bar etc.
LR7
φ
3
φ
4
Mounting Bracket with knock-outs
Underside
Mounting Bracket with knock-outs
Topside
Hexagon Bolt
Flanged Nut
Waterproof
Packing
（
Unit: mm
）
0.8 N m
Recommended
Torque
Knock-Out Mount Bracket Side
12
Pole
※
Not included with
this product.
Pole Waterproof Ring
Mounting Bracket
Binding Head Tapping Screw
3×12
2pcs.
0.8 N m
Recommended Torque
1.Place the Mounting Bracket on an even surface.
2.Be sure to remove the waterproof packing from the Mounting Bracket.
3.Knock out the three knock-out holes with a steel punch, etc.
4.Insert the hexagon bolt into the knockout holes and affix with the flanged nuts.
5.Insert the waterproof packing.
Select between "Direct" or "Pole" mounting
■
K T
Direct Mount
Pole Installation
After inserting accessories,
check the bolt length.
Point
1. Be sure to remove the waterproof packing from
the Mounting Bracket.
2. Install the Pole Waterproof Ring in the Mounting Bracket.
Check that the 2 ribs are on the outside.
3. Insert Pole into the Mounting Bracket.
See the figure on the left for details on the direction of insertion.
4. Tighten the Binding Head Tapping Screws (2 pcs.) from the
topside of the Mounting Bracket.
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
