2
WARNING: FOR OUTDOOR USE ONLY!!!
Caution: Hot while in operation. Do not touch. Keep children,
clothing, furniture, gasoline and other liquids having flammable
vapors away from heater at all times.
1. The installation of this appliance must conform with local codes or, in the absence of
local codes, the National Fuel Gas Code ANSI Z223.1-1988.
2. There must be adequate clearance around all air openings into the combustion
chamber, clearances from combustible materials, and accessibility and for combustion
and ventilating air supply. See page 16 for specific clearances from combustibles.
3. The inlet gas supply pressure must be
11” W.C. Use only the hose, regulator, and tank
adapter that are supplied with the product. For use with LP Gas only.
4. Test all fittings and connections with a soapy solution prior to use. Never use an open
flame or open flame device.
5. Certain items or materials when stored under the heater or too close to the heater head
will be subject to radiant heat and these items could be damaged.
6. Please review carefully and follow all assembly instructions as shown in this manual.
7. If you do not understand any of these instructions please call your selling dealer or call
us directly at 949-474-3070 or email us at
.
8. Please carefully inspect the unit before each use. Be sure there are no visible cracks,
damage, abrasion, or other signs of visible wear. If the hose appears to have any
problem whatsoever it should be replaced with a genuine Patio Comfort replacement
part.
9. If you experience any problems or have any questions please contact your selling
dealer or AEI Corporation directly. Please do not return the unit to the seller without
prior authorization.
Please make note of all CAUTIONS, WARNINGS,
INSTRUCTIONS and INFORMATION throughout this guide.
SPECIAL ATTENTION:
THIS SYMBOL NOTES
SAFETY RELATED ITEMS OR PRODUCT
WARNINGS
