STEP 7 :
7-1 Access the gas storage area by raising the gas tank housing
and placing it on top of the post bracket.
7-2 Follow the regulator instructions for connecting to gas.
7-3 Place propane (recommended fuel) gas cylinder
onto cylinder base.
7-4 Replace the gas tank housing.
8
HEATER STAND AND LOCATION
•
The heater is for outdoor use only. Always ensure adequate fresh
air ventilation.
•
Always maintain proper clearance to combustible materials, i.e.
top 50cm (18 inches) and sides 60cm (24 inches) minimum –see
figure 1.
•
Heater must be placed on firm level ground.
•
The heater must conform to local codes and storage/handling of
LPG.
•
Never operate heater in an explosive atmosphere where petrol or
other flammable liquids or vapours are stored.
•
Before moving heater turn off gas supply, allow burner to cool.
9
STEP-BY-STEP PROCEDURE
SETTING UP
