Patio Heater 4U BFX740, Operating Instructions Manual

Page: 4 / 8

Parts
supplied:

Cylinder base with LPG tank housing

Post assembly with 3 pcs post bracket

Burner assembly and fittings

Propane regulator, 2 clips and high pressure LPG hose

81cm reflector inc. 6pcs 20mm washer and 3 pcs wing nuts

4 M6 x 10mm bolts for assembly post and burner

6 pcs bolt & nuts M6 x 35mm for post and post brackets

3 pcs bolts M8 x 16mm for post bracket and stand

3 pcs ground fixer

6 pcs M6 x 10mm ground fixer bolts & nuts
Tools needed:

Open end wrench 10 & 13MM

Adjustable opening wrench (2) 8 inches long

Slip joint pliers 9 inches long

Philips screwdriver – medium blade

Teflon plumbing tape for joints

Spray bottle of soapy water for leakage test
4
PROBLEM
PROBABLE CAUSE SOLUTION
Pilot will not light Gas valve may be OFF Turn gas valve ON
Tank fuel empty Refill LPG tank
Opening blocked Clean or replace
Air in supply system Purge air from lines
Loose connection Check all fittings
Pilot will not
Debris around pilot Clean dirty area
stay on Loose connections Tighten connections
Thermocouple worn Replace thermocouple
Gas leak in line Check connections
Lack of fuel pressure Low fuel in tank
Burner will Pressure is low Low fuel in tank
not light Opening blocked Remove and clean
Control not ON Turn valve to ON
CLEANING & CARE

Wipe off powder coated surfaces with a soft moist rag.

For lacquer surfaces, use a suitable cleaner.

Do not clean heater with cleaners that are combustible or
corrosive.

Remove debris from burner to keep it clean and safe for use.
13
ASSEMBLEY PARTS & PROCEDURE PROBLEM SOLVING