MODEL 7183 DUAL CHANNEL BJ80 BNC A/B/OFFLINE SWITCH WITH SECURE EHTERNET REMOTE
Electro Standards Laboratories, Inc.
(401) 943-1164
www.electrostandards.com - pg 27 - Pub. 5847-01
SSH Session
There are two possible ports to access by default. The standard SSH
port 22 is open for multiple connections. It presents a menu, where one
of the options is the Remote Control SSH tunnel. The other SSH port is
port 10001. This is the direct access to the Remote Control SSH tunnel.
Only one open connection to the Remote Control SSH tunnel can exist
at any given time.
SSH Session using Port 22
When a connection to port 22 is established, a menu will appear. The
menu will allow the selection of the Remote Control SSH tunnel (Option
1), or the Remote Configuration CLI (Option 2), as well as an option to
terminate (Option 3).
Figure 17: SSH Session Menu on Port 22
Selecting Option 1 will redirect to the Remote Control SSH tunnel if it is
open. Once established, the unit can be commanded using the Remote
Control Commands in Table 2.
Figure 18: Remote Control SSH tunnel session using Port 22