MODEL 7183 DUAL CHANNEL BJ80 BNC A/B/OFFLINE SWITCH WITH SECURE EHTERNET REMOTE
Electro Standards Laboratories, Inc.
(401) 943-1164
www.electrostandards.com - pg 25 - Pub. 5847-01
Restoring Factory Defaults from XML
To restore factory defaults for some or all of the settings, choose to
Import from the Filesystem. For the filename in the next screen, type in
“/factory_defaults.xml”. If it is not desired to import all of the settings,
choose which settings to include using the checkboxes below. Press
the “Import” button at the bottom to proceed with the restoration.
Note that it is recommended not to import the “interface” settings group
since this contains the IP address and other such configurations for the
unit. This is different from the “ip” settings group, which contains
protocol related items such as TTL values.
Figure 15: XML Import of Settings, Factory Defaults
Other Configuration Changes
There are many other settings that can be changed or accessed
through this Remote Configuration GUI. Please contact Electro
Standards for any help required for these additional features (see
“Customer & Technical Support” on page 32).