System Maintenance
Changing the Fuse
Warning !! - Before beginning the following procedure, disconnect the unit
from the power source.
Cleaning the unit
The outside surfaces of the unit can be cleaned with a damp (well rung out) lint free
cloth. Please allow the unit to dry fully after cleaning before powering the unit on
again.
Updating the software
Patchwork are continually improving the BlackBox software through improved
usability and adding new features.
The updates are free to BlackBox users and can be obtained by taking the SD Card
supplied with the unit, to a computer with internet access. Using an internet browser
go to
www.patchwork.co.uk/support_updates_blackbox.aspx
and follow the
onscreen instructions.
Important !! - Storage when not in use
If the unit is not going to be used for a long period of time, it is best to remove the
system from the vehicle and store safely in a dry safe location inside your home or
workshop.
2) Remove the fuse from the fuse holder
and replace with a ‘2A’ standard blade
fuse. Refit the fuse holder lid.
1) Gently prise open the fuse holder lid.
