PWdoc0007 rev.2.3
Fitting in the Vehicle
Warranty Void if suction mount fails !!
- It is advised that the suction mount is
removed from the windscreen when the unit is not in operation and reattached
on a day to day basis.
For a more permanent fixing please detach the ram ball from the suction mount and
secure down in the vehicle.
1) Attach the RAM arm to the ball on the
back of the BlackBox unit.
2) Connect the antenna plug to the
connector of the unit.
3) Plug and screw in the power lead
connector.
Be sure not to over tighten.
4) Push the suction mount on to the
windscreen and turn the lever from the
off to on position.
5) Tighten the screw on the arm to secure
in position.
Ensure the unit is level and
square to the windscreen if using tilt.
6) Connect the 3-pin plug of the power
lead to the vehicle power supply. The
unit will power up automatically.
