© Seon Design Inc. | Mar. 2017 | All rights reserved | www.seon.com Part Number: 700-1030 R3
*700-1030*
vMax Trac LMU Install Guide
Install Kit Contents
Card Reader 032-1011
060-1026 Cable
Hex Self Drive Screws (4)
060-1030 Cable adaptor
Install Guide 700-1030
LED Functions
Red, lit
– Ready for reading
Green, lit
– Reading
Installation Steps
1. Unscrew the retainer screw at the bottom of the card reader and remove the back plate.
2. Position the back plate of the card reader on the vehicle surface and mark screw and center hole positions.
3.
Drill out the ½” center hole and mount the backing plate with the 4 self tapping hex head screws.
4. Run the 060-1026 cable
’s 1x4 Microfit end through the hole from the LMU Controller and connect it to the
card reader.
