PATCHWORK BlackBox 510 Operating Instructions Manual Download Page 38 | Manualshive

Page: 38 / 60

PATCHWORK BlackBox 510 Operating Instructions Manual Download Page 38

38

Unit Setup

...VRT Options

VRT Test

This  option  is  used  to  ensure  that
there  is  communications  between
the  BlackBox  and  the  Controller
before starting a variable rate job.
It  is  recommended  that  the  test  is
done with the implement empty.

Connect the BlackBox to the Controller as described on page 19.

Before starting the test ensure the controller box is powered up and ready to
receive data from the unit (some controllers require the implement to be in full
working mode with the vehicle moving). When ready press

Test

to begin and the

Rate

will start counting up 100, 200, 300 up to 1000, check to ensure that the

controller is also counting in sequence (May not be in sync because of a delay in
the data transmission).

If the test is unsuccessful, turn off the controller and the Blackbox and check all
connections. Power up the BlackBox, once loaded press Start BlackBox and go
to Setup > VRT Options > VRT Test. Next power up the controller and when
ready run the test again.

If the test is successful press

Finished

to return to the VRT Options menu.

«
...
36
37
38
39
40
...
»

Summary of Contents for BlackBox 510





























































Reviews:

No comments