26
Unit Setup
Setup
The Setup menu is used to setup
the hardware and software for use
within the job modes and it is vital
that the settings are setup
correctly for the unit to function as
you require.
Recording Details
-
Sets the details that will be recorded against the job for
record keeping and also the implement working width which is important to
accurately set the tracks when using the unit for guidance (See page 27 for
more details).
Local Setting
-
This option is used to set your preferences based on your
location in the world (See page 30 for more details).
GPS Offset
-
Adjusts the distance the actual work is taking place away from the
antenna to improve guidance accuracy. The headland warning feature is also
set under this option (See page 31 for more details).
Ports Setup
- Used to setup the serial ports on the Tilt Correction Unit if using
an external GPS source (or as an external GPS source), Weather Station or In
Cab Printer. The Terrain Compensator reset, Demo Mode and the green trace
recording On/Off method is also set under this option (See page 33 for more
details).
VRT Options
-
Accesses the options for setting up data communications
between the unit and a controller for Variable Rate Application and/or Auto Shut
off (See page 36 for more details).
Save/Load Profiles
-
Opens the area to save or load profiles created for use
with the steering and boom section add on hardware (see supplied instructions
for details).
Advanced
-
Accesses the menu to unlock software modules (See page 39) and
setup the steering and boom section add on hardware (see supplied instructions
for details).
Finished
-
Returns back to the BlackBox menu.
Summary of Contents for BlackBox 510
Page 2: ......
