PATCHWORK BlackBox 510, Operating Instructions Manual

Page: 28 / 60

28
Unit Setup
...Recording Details
Recording Options
The settings entered in this menu
alter how data is recorded on the
BlackBox, this includes the green
trace recording and weather
station information (if fitted).
Recording - This option is used to turn job recording on and off. N.B. If
recording is set to ‘No’ the pause job function will not be available and the
unit will not save any job data when a job is finished.
Autonaming - Sets autonaming on or off. Autonaming is used if the user does
not want to input a farm and field name when starting a new job, if set to „Yes‟ an
automatic job name will be created.
N.B. Only use this option if you do not
plan on keeping accurate records, pause jobs, reload guidance lines or
use field boundary information.
Minimum Speed - Sets the minimum speed that the trace will record at (i.e. if
moving slower than the set speed the trace will not record).
Minimum Angle - Sets the number of degrees that the heading can change
since the previous green trace location point before a new location point is set.
Maximum Distance - Sets the maximum distance that can be travelled in a
straight line before a green trace location point is automatically set. Note if the
minimum angle setting is met or exceeded a point will be automatically set.
Weather Station - Opens the menu where the weather station recording options
can be adjusted. See page 29 for Weather Station Recording Options menu.
Finished - Returns to the Setup Menu.
Important: Decreasing the values of the minimum angle or maximum distance
will result in more location points being created, which can effect the
performance of the unit.