Passap E 8000 Operating Manual Download Page 80

Page: 80 / 266

P rog ramming a pattern sector

Programming, when the control unit is not attached to the
knitti ng machi ne.

This might be necessary, when you want to transfer a pattern
from a PC, that is not near the knitting mach

At the control unit unplug the cable that goes to the motor

and unplug the transformer from the mains. Bring the control

unit together with the transformer to where you want to
program.

Plug the cable of the transformer to the mains.

The first display will be the same as when you start the

machine with the control unit attatched to it.

Now you can press the key

ProgS

Program as usual.

The only difference will be, that when you have finshed

programming there will be no useful row information.

It will always be

0 ??

and SECTOR

Summary of Contents for E 8000











































































































































































































































































Search results

Summary of Contents for E 8000

Reviews:

Brands by name

Popular brands

Passap E 8000, Operating Manual

Search results

Summary of Contents for E 8000

Reviews:

Brands by name

Popular brands