www.paselec
-e
bikes.com
4
1. BIKE'S ASSEMBLING
---------------------------------------------------
1. take out a bicycle from the box and release him from packaging materials;
2. install the front wheel. Keep an eye so that direction is correspond with
the direction of rotation of tires, properly use the quick release.
3. abjust the head set.
4. adjust th front brake.
5. fix the pedals.
6. adjust the front derailleur.
7. tight the crank set s fixing bolts to 30-50Nm
8. adjus the rear brake.
9. adjus the rear derailleur.
10. inflate the wheels.
1.1 ADJUSTMENT OF THE HEAD SET
---------------------------------------------------
1. make sure that all parts of the head set unit assembled correctly
and stand at their places.
2. by anchor s bolt remove the stackness of head set bearings to a level
where the fork will rotate easily, smooth and without stackness.
3. make parallel the stem and the front wheel and tight the fixing bolts(pic.6).
1.2 ADJUSTMENT OF THE FRONT DERAILLEUR
---------------------------------------------------
1. install the front derailleur on the seat tube. Ti ghtening torque is 5-7 Nm. The distance between
chainguide outer plate should be 2-4MM and directly above and parallel to the largest chainring(pic.9)
2. install the chain on the smallest chainring of chainwheel and the large sprocket of the freewheel.
3. through adjustable screw L(low)adjust the front derailleur so that the distance be-tween chain guide
inner plate and chain is about 0.5mm(pic.11).
4. install left shifter on the "small sprocket"position, remove initial slack in the cable, re-secure the front
derailleur cable(pic.12)
5. turn the crank forward, install the chain on the biggest chainring on chainwheel and the small sprocket
on the freewheel.
6. through the adjustable screw on the shifter reach clear work of the front derailleur.(pic.14)
7. through an adjustable screw H(high) adjust the extreme external position of the front derailleur in
such a way so that chain locates at a distance of framework(pic.13)
Adjustment of bicycle must be done by qualified
mechanics in special bicycleworkshop or in bicycle shop.
