750 Interface (USB)
Model No. CI-7599
6
®
C. Plugging a Sensor into the Interface
Analog sensors have DIN
connectors and plug into channels
A, B, and C on the interface.
Digital sensors have stereo plugs
and insert into channels 1, 2, 3, and
4 on the interface.
D. Using the Interface with DataStudio Software
Note:
Before using the interface with DataStudio software, you must
have DataStudio (version 1.7 or later) loaded onto your computer, the
interface connected to your computer, and the power supply turned on.
1.
Connect a
ScienceWorkshop
sensor to any channel on the interface.
2.
Open DataStudio and double click “Create Experiment.”
3.
In the Sensors list, double-click
the sensor to associate the
sensor with the interface
channel (See Figure 2) in the
setup window.
4.
In the Displays list, double-
click on any of the displays to
open a display.
5.
To collect some data, click the
Start
button on the main toolbar.
Result:
Data appears in real-time in the display.
6.
To stop collecting data, go to the main toolbar and click the
Stop
button.
E. Changing Interfaces Between Experiments
If you have both the 750 USB interface and another type of interface
connected to your computer simultaneously, you cannot use both
simultaneously in DataStudio. To change interfaces in DataStudio,
click the
Change
button in the Experiment Setup window, select the
desired interface, and click OK.
C
Figure 1: Connecting a
Sensor to the Interface
Figure 2: Associating the Sensor
icon with the Interface Channel
Note: Both the 750 USB
Interface and 750 SCSI
interface use the same
setup window in DataStu-
dio. For more informa-
tion on operating the
interface with DataStu-
dio, see Appendix C,
“Frequently Asked Ques-
tions” in this manual
or
the DataStudio online
help (ver
.
1
.
7 or later).